Left turnout Polarized HeartMinitrix in scale N: 1/160 with alength of 112.6 mm and an angle of 15° under reference 14938 for model railroading.
Ray ofR4 curve 362.6 mm with the possibility of making parallel tracks of different gauges.
Profiled in code 80
With joint bars installed
Possibility of installing Minitrix 14934 motor.
Minitrix offers a left, polarized heart switch in N: 1/160 scale under part number 14938 which measures 112.6 mm with the curve angle 15° with aR4 radius of 362.6 mm.
Using the curved rail 14927 and then the straight, 14903, this allows for a parallel track at 29.2 mm centers.
Using the straight rail 14903 and then the curved, 14927, this allows for a parallel track at 33.6 mm centers.
Using the straight rail 14905 and then the curved, 14927, this allows a parallel track to be made at 52.1 mm centers.
A switch or TJD can be automated using the Minitrix 14935 and 14934 motors.
Minitrix turnouts have reliability of operation as well as polyvalence during assembly.
By offering normal as well as wound turnouts and also bushing-junctions, the Minitrix track range thus offers a device for every situation.
For standard as well as curved turnouts, there is a possible stop function of the train.There is a switch that powers the track depending on the position of the switch. To activate it, you just have to remove with pliers the small metal "U" in the heart of the switch. Thus, if two trains arrive at the same time on the switch point, only one of them will pass according to the activation direction of the switch in order to avoid collisions. If the metal "U "s are left in place, then the switch will operate with current in both tracks.
It is possible to make a parallel track using a minimum of space (33.6 mm center distance) simply by placing two switches opposite each other.
The N: 1/160 scale track from Minitrix offers a broad range of straight track as well as curved track, turnouts, and crossovers to provide the maximum possibility of making a model train layout using a minimum amount of space.
The track sections are made from a stainless metal alloy ensuring reliability of contact between the wheel and rails.
The width of a Minitrix track with sleepers is16 mm, and the height of the section is 2.1 mm in code 80.
The Minitrix brand offers 14 turnouts, crossings as well as junction crossings:
-Left-hand turnout with a length of104.2 mm, anangle of 24° and a R1 radius of 194.6 mm under part number 14951.
-Right-hand switch with a length of 104.2 mm, an angle of 24° and a R1 radius of 194.6 mm under part number 14953.
-Double junction crossing (TJD) with a length of 104.2 mm, anangle of 30° and a R1 radius of 194.6 mm under part number 14968.
-Crossing of a length of 104.2 mm, anangle of 30° and a R1 radius of 194.6 mm under reference 14958.
-Crossing length of 129.8 mm, anangle of 15° and a R4 radius of 362.6 mm under reference 14973.
-Dual Junction Crossing (TJD) with a length of 129.8 mm, anangle of 15° and a R4 radius of 362.6 mm under part number 14960.
-Left-hand switch with a length of 112.6 mm, an angle of 15° and a R4 radius of 362.6 mm under part number 14954.
-Right-hand switch with a length of 112.6 mm, an angle of 15° and a R4 radius of 362.6 mm under part number 14955.
-Left-handed switch with a polarized core tip with a length of 112.6 mm, anangle of 15° and a R4 radius of 362.6 mm under part number 14938.
-Right-hand switchwith polarized heart tip with a length of 112.6 mm, anangle of 15° and a R4 ray of 362.6 mm under part number 14939.
-Left curvedneedle of 42° and R1 / R2 radius of 194.6 / 228.2 mm under part number 14956.
-Right curvedneedle of 42° and R1 / R2 radii of 194.6 / 228.2 mm under part number 14957.
-Leftcurve switch of 30° and R3 / R4 rods of 329 / 362.6 mm under part number 14947.
-Rightcurve switch of 30° and R3 / R4 rods of 329 / 362.6 mm under part number 14948.
Easy to install,Minitrix turnouts comewith pre-installed fishplates for joining two rails.
For fastening, the Minitrix brand offers metal clips (optional) under part number 66528.
For permanent installation, there are screws as well as fastening nails in the Minitrix brand under part numbers 66548 / 66537.
The metal and plastic rails sold separately are under part numbers 66525 / 66539.
The Minitrix brand offers a gauge for its tracks under part number 66600 in order to make an accurate grid plan.
|Angle ( degrees )||15°|
|Scale||N : 1/160|
|Point of heart of the switch||Metal|
|Radius ( in mm )||R4 362.6 mm|
|Length ( in mm )||112.6|