Left curved switch pola core 30° R3/R4 - Minitrix 14947 - N 1/160 - code 80

Brand : MINITRIX   |   Référence : TR14947
N : 1/160 2R
Prix unitaire TTC :
€ 37.99

Paiement en plusieurs fois sans frais:

In stock
Delivered within 48h
From € 7.90
Secure Payment

Résumé

Left curve switch with polarised core under reference 14947 from manufacturer Minitrix.

Rayon of curve R3 329 mm / R2 362.6 mm.

Scale : N : 1/160th.

Angle : 30°.

Profiled in code 80

Black crossmembers

With splints fitted

Possibility of fitting Minitrix 14934

motor.

Description

Minitrix offers a left curved switch with polarised core, in N scale: 1/160th under reference 14947 whose curve angle is 30° with an R3 radius of 329 mm and an R4 of 362.6 mm. 

It is possible to automate a switch or TJD using the Minitrix 14935 and 14934 motors.

Minitrix turnouts have reliability in operation as well as polyvalence during assembly.

By offering normal as well as wound turnouts and also through-junctions, the Minitrix track range thus offers a device for every scenario.

For both standard and curved turnouts, there is a possible stop function for the train. There is a switch that supplies power to the track depending on the position of the point. To activate it, you simply use pliers to remove the small metal "U "s at the heart of the switch. This means that if two trains arrive at the point at the same time, only one of them will pass in the direction in which the switch is activated, to avoid collisions. If the metal "U "s are left in place, then the switch will operate leaving current in both tracks.

It is possible to make a parallel track using a minimum of space (33.6mm centre-to-centre) simply by placing two switches opposite each other.

The track at scale N : 1/160th from the brand Minitrix offers a wide range of straight track as well as curved track, turnouts and crossings to offer a maximum possibility to build a model train layout using a minimum amount of space.

The track sections are made from a rust-free metal alloy guaranteeing reliable contact between the wheel and the rails.

The width of a Minitrix track with sleepers is 16 mm, and the height of the profile is 2.1 mm in code 80.

 

Easy to install, Minitrix switchgears are supplied with fishplates already installed enabling the junction between two rails to be made.

For fixing, the Minitrix brand offers metal clips (optional) under reference 66528.

For permanent installation, there are screws as well as fixing nails in the Minitrix brand under references 66548 / 66537.

The metal plates and plastic plates sold separately are under references 66525 / 66539.

The brand Minitrix offers a gabarit for its tracks under reference 66600 in order to make an accurate network plan.

Technical sheet

Angle (degrees)
30
Track code
80
Scale
N : 1/160
Point at the heart of the switch
Plastic
Operating system
2 Rails - Direct current

Manufacturer : MINITRIX

Products from the MINITRIX brand for model railroading and diorama creation. Train, locomotive, carriage, passenger car, rail and points N scale from the MINITRIX brand.

Jura Modélisme offers locomotives, passenger cars, freight cars, rails and other track accessories from the MINITRIX brand in 1 : 160th scale.

Find also all rails: straight rails, flexible rails, turnouts, fishplates, turnout motors from the MINITRIX brand.

Discover MINITRIX brand products for model trains and model railroad layouts.


View products from manufacturer MINITRIX

Ce qu'en pensent nos clients

Associated products

Our suggestions

These products might also interest you...