Roco 42493 - R 959 mm- 10° - HO : 1/87 - Code 83

Traverse jonction simple 10° 345mm et 959mm de rayon
  • Traverse jonction simple 10° 345mm et 959mm de rayon
  • Traverse jonction simple 10° 345mm et 959mm de rayon


Fabricant : ROCO

Single Junction Crossing (SJC) EKW10 RocoLine 42493, 10° angle, radius 959 mm, length 345 mm for model railroading to scale HO 1/87 .

2 2.5 mm track elements (D2) and 1 8 mm track element (D8)are included for use of the TJS diagonally.

Delivered with an installation template

Roco track section is in code 83

More details

ROCO Locomotive, locotracteur, wagons, voitures voyageur de la marque ROCO. Découvrez également les voies Rocoline et Géoline : rail, aiguillage et accessoires de voies ROCO.

En savoir plus

46.946,90 € tax incl.

En stock - Livré en 48h

  • France : à partir de 7,90 €
    (Franco à partir de 199€)

    Europe : à partir de 14,90 €
    (Franco à partir de 399€)

    Suisse : à partir de 14,90 €
    (Franco à partir de 399€)

Add to wishlist

You must be logged

Large track crossing Single Junction Crossing (SJC) Roco 42493.

The SJC is a crossing that allows for track changes like a switch.
The track change can be done only on one side as long as a Double Junction Crossing (DJC) Roco 42496 allows for track changes on both sides.

It is possible to install 2 x Roco 40295 (tabletop) or 2 x Roco 10030 (under tabletop) motors on Rocoline ballastless junction crossings.

For analog use,the Roco 10520 control box allows to control motorized turnouts/junction crossings.

For digital use, the Roco 10836 module allows to control up to 8 motors with one central unit.
Corresponds to the length of a straight rail RocoLine 42510 of 230 mm a straight rail Rocoline 42512 of 115 mm..

The track system RocoLine is a so-called "2 Rails" power system operating in direct current in analog and digital modes.

Discover the RocoLine track, which is reproduced with sturdy plastic sleepers that perfectly imitate railroad tracks.

These tracks, will perfectly equip your model train layout and allow the running of your trains at Ho 1/87 scale .

The rail profile is made of maillechort, an alloy of copper and brass. This material has the particularity of being a very good electrical conductor. Moreover, unlike steel rails, it does not oxidize.

The connection of two RocoLine rails is made via the rail's joint bars.
Once connected,the junction between 2 rails is discreet.

To supply your tracks with analog, you can use the Roco rail reference 42421.

For digital operation, use the Roco connection cable reference 42613.

Angle ( degrees ) 10°
Track code 83
Scale HO : 1/87
Material Plastic
Radius ( in mm ) 959
Length ( in mm ) 345


Rail cleaning rubber
6,28 € En stock
Expédié sous 24H
Track saw
15,89 € En stock
Expédié sous 24H
Left turnout motor
30,90 € En stock
Expédié sous 24H
Manual control of left switch
10,19 € En stock
Expédié sous 24H