Roco 42488 - R 1946 mm- 10° - HO : 1/87 - Code 83

Aiguillage long à gauche WI10 10° 345mm
Previous
  • Aiguillage long à gauche WI10 10° 345mm
  • Aiguillage long à gauche WI10 10° 345mm
  • Aiguillage long à gauche WI10 10° 345mm
Next

RO42488

Fabricant : ROCO

Large Left Turnout Wl10 RocoLine 42488, 10° angle, radius 1946 mm, length 345 mm for model railroading in scale HO 1/87 .

A 5 mm track element (D5) is included for use with diagonal turnout.

Delivered with installation template.

Roco track profile is
code 83.

More details

ROCO
ROCO Locomotive, locotracteur, wagons, voitures voyageur de la marque ROCO. Découvrez également les voies Rocoline et Géoline : rail, aiguillage et accessoires de voies ROCO.

En savoir plus

29.929,90 € tax incl.

En stock - Livré en 48h

  • France : à partir de 7,90 €
    (Franco à partir de 199€)

    Europe : à partir de 14,90 €
    (Franco à partir de 399€)

    Suisse : à partir de 14,90 €
    (Franco à partir de 399€)

Add to wishlist

You must be logged

Roco 42488 Large Left Deflection Switch.

The Roco 40295 (tabletop) or Roco 10030 (under table) motor can be installed for Rocoline switches without ballast.

It is also possible to install a 40297 manual controller.


For analog use, the Roco 10520 control box allows control of motorized turnouts/junction crossings.

For digital use, the Roco 10836 module allows control of up to 8 turnouts with one control unit.

It is possible to use 2 Roco 42430 curved rails in order to make a parallel track.

Corresponds to the length of a straight rail RocoLine 42410 of 230 mm a straight rail Rocoline 42412 of 115 mm..

The angle of the heart of the switch is 8.1°.


The RocoLine track system is a so-called "2-Rail" power system operating in direct current in both analog and digital modes.


Discover the RocoLine track, which is reproduced with sturdy plastic sleepers that perfectly imitate railroad tracks.

These tracks, will perfectly equip your model train layout and allow the running of your trains at Ho 1/87 scale .

The rail profile is made of maillechort, an alloy of copper and brass. This material has the particularity of being a very good electrical conductor. Moreover, unlike steel rails, it does not oxidize.



The connection of two RocoLine rails is made via the rail's joint bars.
Once connected,the junction between 2 rails is discrete.

To supply your tracks with analog, you can use the Roco rail reference 42421.

For digital operation, use the Roco connection cable reference 42613.

Angle ( degrees ) 10°
Track code 83
Scale HO : 1/87
Material Plastic
Radius ( in mm ) 1946
Length ( in mm ) 345

Accessories

Track saw
15,89 € En stock
Expédié sous 24H
Left turnout motor
30,90 € En stock
Expédié sous 24H
Manual control of left switch
8,79 € En stock
Expédié sous 24H
Set of tools for track laying
109,90 € En stock
Expédié sous 24H