Large right curved turnoutBWr9/10 RocoLine 42477, 30° angle, R9 radius 826.4 mm, length on longest side 487 mm for model railroading to scale HO 1/87 .
To go from radius R9 826.4 mm to R10 888 mm.
Roco track profile is in code 83.
Roco 42477 large right deflection curved turnout.
The Roco 40296 (tabletop) or Roco 10030 (under table) motor can be installed for Rocoline turnouts without ballast.
A 40298 hand control can also be installed.
For analog use,the Roco 10520 control box can control motorized turnouts/junction crossings.
For use in digital, the Roco 10836 module allows control of up to 8 turnouts with a central unit.
The R9 826.4 mm and R10 888 mm radii correspond reciprocally to the Roco 42427 and Roco 42428 curved rails.
The RocoLine track system is a so-called "2 Rails" power system operating in direct current in both analog and digital modes.
Discover the RocoLine track, which is reproduced with rugged plastic sleepers that perfectly mimic railroad rails.
These rails, will perfectly equip your model train layout and allow the running of your trains at Ho 1/87 scale .
The connection of two RocoLine rails is made via the rail's joint bars.
Once connected,the junction between 2 rails is discreet.
To supply your tracks with analog, you can use the Roco rail reference 42421.
For digital operation, use the Roco connection cable reference 42613
|Angle ( degrees )||30°|
|Scale||HO : 1/87|
|Radius ( in mm )||826,4, 888|
|Length ( in mm )||487|