Right hand turnout Roco 42533 with core polarization pre-installed.
It is possible to install the Roco 42620 (analog) or Roco 42624 (digital) motor on Rocoline turnouts with ballast.
For analog use, the Roco 10520 control box allows control of motorized turnouts/junction crossings.
For use in digital, the decoder integrated into the Roco 42624 motor allows direct control by a digital control unit.
It is possible to use the Roco 42528 curved rail to make a parallel track.
Corresponds to the length of a straight rail RocoLine 42510 of 230 mm.
The angle of the heart of the switch is 10.8°.
The track system RocoLine is a so-called "2-Rail" power system operating in direct current analog and digital modes.
Discover RocoLine track with soft ballast, which is replicated with a light gray rubber sole that perfectly mimics the texture of the ballast.
This soleplate, allows phonetic isolation of your model train layout and thus limit the noise of rolling stock at the HO 1/87 scale .
The track ties mimic wooden ties.
The connection of two RocoLine rails with ballast is made via the rail's fishplates but also via clips located under the rubber soleplate.
Once connected,the junction between 2 rails is discreet.
To supply your tracks with analog, you can use the Roco rail reference 42521.
For digital operation, use the Roco connecting rail reference 42517.