The brand ESU offers a ECoSDetector Extension Module under part number 50095.
Caution: The current of all outputs must not exceed 1.5A.
Any DC or AC transformer between 15V and 19V may be used for the power supply.
Controlled tracking benefiting from several features,
The outputs can be used to display the status of each track section of a network (on the track control panel for example). You also have the option to display their status on a screen, via a block signal (red/green).
The transistor outputs of the ECoS detector expansion module can be easily programmed via your ECoS control station.
It is possible to design your own runway control panel!
To do this, you'll need to connect pushbuttons or toggle switches to the ECoSDetector outputs. That way, you'll be able to operatethe turnouts and control the routes from the control station.
The transistor outputs on the expansion module are intended to illuminate sections of track. It is recommended that you use the screen of your ECoS control station to configure more simply the various features available.
To design a larger control panel, you can combine multiple ECoSDetector modules. This will controlup to 100 track control panels per layout.
