Large Track Crossing Double Junction (TJD) Roco 42549.
The TJD is a crossing that allows track changes like a switch.
The track change can be done on both sides as long as a Roco 42591 Single Junction Crossing (SJC) allows track change on one side only.
It is possible to install 2 Roco 42620 (analog) or Roco 42624 (digital) motors on the Rocoline Junction Crossings with ballast.
For analog use, the Roco 10520 control box allows to control the motorized turnouts/junction crossings.
For digital use, the decoder integrated in the Roco 42624 motor allows directly the control by a digital control unit.
Corresponds to the length of a straight rail RocoLine 42510 of 230 mm a straight rail Rocoline 42512 of 115 mm..
The track system RocoLine is a so-called "2 Rails" power system operating in direct current in analog and digital modes.
Discover RocoLine track with soft ballast, which is replicated with a light gray rubber sole that perfectly mimics the texture of the ballast.
This soleplate, allows phonetic isolation of your model train layout and thus limit the noise of rolling stock at the HO 1/87 scale .
The track ties mimic wooden ties.
The connection of two RocoLine rails with ballast is made via the rail's fishplates but also via clips located under the rubber soleplate.
Once connected,the junction between 2 rails is discreet.
To supply your tracks with analog, you can use the Roco rail reference 42521.
For digital operation, use the Roco connecting rail reference 42517.