Roco 42423 curved rail with a R3 radius of 419.6 mm, a angle of 30° and alength of 218 mm for model railroading at HO 1/87 scale.
It takes 12 Roco 42423 curved rails to make a circle of 839.2 mm diameter.
Roco track profile is made of code 83.
Roco 42423 R3 Curved Track will allow you to make a track oval of 839.2mm diameter on your model train layout.
The Rocoline curved track range consists of 6 different radii numbered R2 through R6 and R9:
R2: 358 mm radius Roco 42422 angle 30°.
R3: 419.6 mm radius Roco 42423 30° angle.
R4: 481.2 mm radius Roco 42424 30° angle.
R5: Rayon 542.8 mm Roco 42425 30° angle.
R6: Rayon 604.4 mm Roco 42426 30° angle.
R9: Rayon 826.4 mm Roco 42427 15° angle.
R21/4: Small R2 curved rail of 358 mm radius Roco 42408 7.5° angle (for use with Roco 42432/42433 turnouts).
R31/4: Small R3 curved rail of 419.6 mm rod Roco 42409 7.5° angle.
R10: 888 mm radius Roco 42428 15° angle (for use with 15° angle turnouts to make a parallel track).
R20: 1962 mm radius Roco 42430 5° angle (for use with 10° angle turnouts to make a parallel track).
The RocoLine track system is a so-called "2 Rails"power system operating in direct current in both analog and digital modes.
Discover the RocoLine track, which is replicated with heavy-duty plastic sleepers that perfectly mimic railroad rails.
These rails, will perfectly equip your model train layout and allow the running of your trains at Ho 1/87 scale .
The connection of two RocoLine rails is made via the rail's joint bars.
Once connected,the junction between 2 rails is discreet.
To supply your tracks with analog, you can use the Roco rail reference 42421.
For digital operation, use the Roco connection cable reference 42613.
|Angle ( degrees )||30°|
|Scale||HO : 1/87|
|Radius ( in mm )||419,6|
|Length ( in mm )||218|