The brand ESU offers a Virgin LokSound 5 Nano DCC decoder with speaker under part number 58923.
The speaker is supplied, but you'll need to install it on the decoder yourself.
RailComPlus technology: Automatic connection to a digital control unit.
Introduction to the ESU 58923 decoder,
Handles all DCC operating modes, can be controlled and programmed using compatible digital control units . Thanks to RailCom, CV values on the main track can be read (CV 1 to 255). This decoder also benefits from 6 outputs with amplified functions that each hold a voltage of 180 mA. (the current of each output can be adjusted separately).
The LokPilot 5 Fx recognises Marklin braking sections as well as Zimo HLU/ZACK and the Lenz ABC system. It is possible to use a DCC braking module or a direct voltage.
The decoder automatically switches between these two operating modes.
The LokSound 5 Nano DCC decoder can play up to 12 channels at the same time. Each channel can be resolved up to 16 bits and 312580 kHz, and delivers Hifi quality to your system. Featuring a memory capacity of 128 Mbit. As for the speakers, they have a power output of3 W and can have impedancebetween 4 and 32 ohms. All sound options can beindividually adjusted.The ultra-flexible sound engine provides immersive rail vehicle hearing quality.
This product includes 6 outputs with amplified functions. All the most important lighting functions are available. The intensity of the lighting can be set individually.
The Bell armature motors guarantee quiet operation. The unique "Autotune" feature allows the decoder to automatically calibrate itself to the motor. This decoder provides up to 0.75A of motor current.
To fill "sales"; "defective" track sections a PowerPack part number 54671 can be connected to the LokPilot 5 Fx Micro.
The outputs are protected against short circuits.
