The Roco 42013 E Track Set contains a batch of track with soft ballast that can come to supplement your already installed model train layout or your starter set if you are just starting out.
Each Roco starter set already contains the A rail set including a track oval.
By adding the E set to the other sets B C D, Roco references 42010, 42011 and 42012 the total footprint is approximately 250 x 105 cm.
Here are the contents of the Roco 42013 E box in detail:
- 2 Straight G½ Roco 42512 rails with a length of 115 mm.
1 Straight G1 Roco 42510 rail with a length of 230 mm.
2 Wl15 left-hand switches Roco 42538 with a 30° angle and an R2 radius of 358 mm.
2 Wr15 right-hand switches Roco 42539 with a 30° angle and an R2 radius of 358 mm.
1 Manually operated unraveling rail G½ Roco.
2 Knockers/Butters Roco 42608.
2 Ballast ends Roco 42651.
- 2 Straight G½ Roco 42512 rails with a length of 115 mm.
The track system RocoLine is a so-called "2-Rail" power supply system operating in direct current analog and digital modes.
Discover RocoLine track with soft ballast, which is replicated with a light gray rubber sole that perfectly mimics the texture of the ballast.
This soleplate, allows phonetic isolation of your model train layout and thus limit the noise of rolling stock at the HO 1/87 scale .
The track ties mimic wooden ties.
The connection of two RocoLine rails with ballast is made via the rail's fishplates but also via clips located under the rubber soleplate.
Once connected,the junction between 2 rails is discreet.
To supply your tracks with analog, you can use the Roco 42521 rail reference.
For digital operation, use the Roco connecting rail reference 42517.
